| Magnesium - Deformation | |||
| Title | Author | Reference | Affiliation |
|---|---|---|---|
| Deformation Behaviour of a Mg-Al-Zn Alloy at High Strain Rates | E.A. El-Magd, & H.P. Weisshaupt | Mordike, BL, Kainer, KU eds (1998) Magnesium Alloys and their Applications, Hamburg, Germany, Werkstoff-informations gesellshaft. | Rheinisch-Westfalische Technische Hochschule Aachen (D) & Conti Tech Formteile GmbH, Koln (D) |
| Deformation Behaviour of AZ Alloys at High Strain Rates | K.U. Kainer, Technische Universitat Clausthal, Clausthal-Zellerfeld (D); E. Lach, Deutsch-Franzosisches Forschungsinstitut, Saint-Louis (F) | Mordike, BL, Kainer, KU eds (1998) Magnesium Alloys and their Applications, Hamburg, Germany, Werkstoff-informations gesellshaft. | Technische Universitat Clausthal, Clausthal-Zellerfeld (D) & Deutsch-Franzosisches Forschungsinstitut, Saint-Louis (F) |
| Deformation Twinning of AZ31 Alloy in Quasistatic and Dynamic Compression Tests | Lach E., Kainer K.U., Bohmann A., Scharf M. | Mordike, BL, Kainer, KU, eds (2000) Magnesium Alloys and their Applications, Munich, Germany | GKSS Research Centre Geesthacht, Germany |
| Low Temperature Super-Plasticity Response of AZ31B Magnesium Alloy with Severe Plastic Deformation | A. Ben-Artzy, A. Shtechman, A. Bussiba, Y. Salah, S. Ifergan, M. Kupec and R. Grinfeld | Kaplan, HI editor (2003) Magnesium Technology 2003, TMS, Warrendale, PA | Rotem industries LTD, ISRAEL & Ben-Gurion University,ISRAEL |
| Influence of Thermoplastic ECAP on Mechanical Properties and Microstructures of an AZ61A Magnesium Alloy | Y. Yinbiao, S. Guoyuan, W. Bing and H. Yinghan | Luo, AA, editor (2004) Magnesium Technology 2004, TMS, Warrendale, PA | Nanjing University of Science & Technology, CHINA |
| TEM Investigation of Dislocation Mechanisms in Mg Alloy AZ31B Sheet | S.R. Agnew and O. Duygulu | Luo, AA, editor (2004) Magnesium Technology 2004, TMS, Warrendale, PA | University of Virginia |
| Cyclic Deformation Behavior Of Newly Developed Microalloyed Mg Wrought Alloys In Corrosive Environment | Fleck C., Löhe D. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | Fachgebiet Werkstofftechnik; Technische Universität Berlin |
| Deformation Behavior Of Ecaped AZ31 Mg Alloy at Low Homologous Temperatures | Lee H. S., Kim D. W., Bang W., Chang Y. W. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | Pohang University of Science and Technology |
| Development of Magnesium Sheetmetal Forming Parts for Electronic Appliances: Case Studies | Bang W., Sung H.J., Kim I.J., Choo D., Park W.-J., Jung I.H., Ahn S. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | RIST (Research Institute of Industrial Science and Technology) |
| Hot Deformation Mechanisms In Mg-x%Al -1%Zn -y%Mn Alloys | Seale G., Carter J., Verma R., Krajewski P., Essadiqi E., Javaid A., Galvani C., Zarandi F., Yue S. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | Department of Mining, Metals and Materials Engineering, McGill University |
| Initial Ballistic Evaluation of The Magnesium Alloy AZ31B | Jones T. L., DeLorme R. D., Burkins M. S., Gooch W. A. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | US Army Research Laboratory |
| Numerical Modelling Of Large Strain Deformation In Magnesium Alloy AM30 | Lévesque J., Inal K., Neale K. W., Mishra R. K., Luo A. A., Jiang L. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | Department of Civil Engineering, University of Sherbrooke |
| Prediction of Variability in Mechanical Properties based on Microstructural Simulations and Finite Elements Based Computations | Lee S. G., Sreeranganathan A., Gokhale A. M. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | School of Materials Science and Engineering, Georgia Institute of Technology |
| Study of Texture Evolution During Channel-Die Compression of Mg-Al Alloys by In-Situ Neutron Diffraction | Sediako D.G., Gharghouri M.A., Rogge R.B., Watson M.J. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | Canadian Neutron Beam Centre |
| Texture Evolution in AM30 Mg Alloy Deformed along Different Strain Paths | Jiang L., Jonas J.J., Mishra R., Luo A.A., Sachdev A.K., Godet S. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | McGill University, Dept. of Materials Engrg |
| The Influence of Grain Size on Yielding Asymmetry of Extruded AZ31 Magnesium Alloy | Wang J. T., Yin D. L., Zhu X. R., Wang R., Zhao X. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | Department of Materials Science and Engineering, Nanjing University of Science and Technology |
| The Role of Texture in Yielding Asymmetry of Extruded AZ31 Magnesium Alloy | Yin D. L., Wang J. T., Zhu X. R., Wang R., Zhao X. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | Department of Materials Science and Engineering, Nanjing University of Science and Technology |
| Twinning And Ductile Failure Of Mg-3Al-1Zn | Barnett M.R. | Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL | Centre for Material and Fibre Innovation, Australia |
| Analysis of Magnesium Alloy AZ31B-H24 for Ballistic Applications | Tyrone Jones, Matthew Burkins, and William Gooch | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | U.S. Army Research Laboratory, Weapons and Materials Research Directorate, Aberdeen, Maryland |
| Constitutive Behavior of Four Wrought Magnesium Alloys under Warm Forming Conditions | Sean Agnew, Cyrus E. Dreyer, John F. Polesak III, William V. Chiu, C. John Neil, and Marcos Rodriguez | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | University of Virginia, Charlottesville, Virginia |
| Deformation Mechanisms of AZ31 Magnesium Alloy | Timo Ebeling, Christian Hartig, Torsten Laser, and Rüdiger Bormann | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | Hamburg University of Technology, Inst. of Materials Science and Technology, Hamburg, Germany |
| Development of a Strip-Rolling Technology for Mg Alloys Based on the Twin-Roll- Casting Process | Rudolf Kawalla, Matthias Oswald, Christian Schmidt, Madlen Ullmann, Hans-Peter Vogt, and Nguyen Duc Cuong | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | Freiberg University of Mining and Technology, Freiberg, Germany |
| Effect of {10-11} Contraction and {10-11}-{10-12} Double Twins on the Subsequent Deformation Behavior of Two Mg Alloys | Lan Jiang, John J Jonas, and Raj Mishra | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | McGill University, Dept. of Materials Engrg., Montreal, Quebec, Canada |
| Effect of Coiling on Hot Bulge Testing of AZ31 Magnesium Sheet | Jon Carter | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | General Motors R&D Center, Warren, Michigan |
| Effect of Twinning on the Mechanical Behavior in Mg-Zn-Y Alloys | Ju Youn Lee, Hyun Kyu Lim, Do Hyung Kim, Won Tae Kim, and Do Hyang Kim | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | Center for Noncrystalline Materials, Dept. of Metallurgical Eng. Yonsei Univereity, Seoul, Korea |
| Elastic Constants of Magnesium Compounds from First-Principles Calculations | Swetha Ganeshan, Hui Zhang, Shunli L Shang, Yi Wang, and Zi-Kui Liu | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | Pennsylvania State University, University Park, Pennsylvania |
| Finite Element Modeling of the Thermo-Mechanical Behavior of an AZ31 Magnesium Alloy during Hot Rolling | Fady Elsayed, Hany Ahmed, Mary Wells, Gary Lockhart, and Daan Maijer | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | Department of Materials Science, German University, Cairo, Egypt |
| Flow Stress Modelling of Magnesium AZ31 Alloy Based on High Strain Plane Strain Compression Data | Rahul Bhattacharya, Brad Wynne, Mark Rainforth, and Bruce Davies | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | The University of Sheffield (IMMPETUS), Sheffield, United Kingdom |
| Forming Characteristics of Mg Sheet with Variation of Temperatur | Yong Nam Kwon, Young Seon Lee, and Jung Hwan Lee | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | Korea Institute of Materials Science, Changwon, Korea |
| Fracture Toughness in Magnesium Alloys by Dispersion of Quasicrystalline Phase | Hidetoshi Somekawa, Alok Singh, and Toshiji Mukai | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | Structural Metals Center, National Institute for Materials Science, Tsukuba, Japan |
| Influence of Cerium on Texture and Ductility of Magnesium Alloy Extrusions | Raja K. Mishra, Anil K. Gupta, P. Rama Rao, Anil K. Sachdev, Arun M. Kumar, and Alan A. Luo | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | General Motors R&D Center, Warren, Michigan |
| Investigating the Effect of Strain Rate and Temperature on the Deformability and Microstructure Evolution of AZ31 Magnesium Alloy | Ismael Abdel Maksoud, Hany Ahmed, and Johannes Rödel | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | Department of Materials Science, German University, Cairo, Egypt |
| Microstructure and Bendability of AM60 and AZ61 Magnesium Alloy Tubes | Yingxin Wang, Li Jin, Xiaoqin Zeng, Wenjiang Ding, Alan A. Luo, Anil K. Sachdev, and Raj Mishra | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | National Engineering Research Center of Light Alloys Net Forming, State Key Laboratory of Metal Matrix Composite School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, China |
| Study of Deformation Modes in AZ80 Magnesium Alloy | Jayant Jain, Warren J. Poole, and Chad W. Sinclair | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | University of British Columbia, Vancouver B.C., Canada |
| The Flow Stress during Hot Compression Deformation of a Mg-Gd-Y-Zr Magnesium Alloy: Experiments and Numerical Simulations | Xinping Zhang, and J. T. Wang | Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA | Nanjing University of Science and Technology, Nanjing, China |
| A Comparative Study on Deformation Behaviors of Two Lightweight Alloys: Magnesium and Titanium, and Their Potential Applications | Wu X., Yuan Q., Liu Y., Huang Z. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Mechanical Engineering, Wayne State University |
| A Constitutive Description for Drawing Limit of Magnesium Alloy Tube Based on Continuum Damage Mechanics | Guozheng Q., Bin C., Jie Z., Ying T. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Department of Mechanical Engineering, Chongqing university |
| An Upper-bound Analysis for Change-channel Angular Extrusion | Liu T., Liu Y., Lu L., Pan F. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Chongqing University |
| Anisotropic Plastic Deformation Behavior of As-extruded ZK60 Magnesium Alloy at Room Temperature | Jinbao L., Qudong W., Liming P. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | National Engineering Research Center for Light Alloy Net Forming, Shanghai Jiao Tong University |
| Comparison Between ZM21 and ZME210 with Different Hot Extrusion Ratio | Peng J., Song C., Pan F. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | College of Materials, Chongqing University |
| Comparison of Hot-deformation Behaviors of AZ31 with Different Initial States | Wang B., Xin R., Huang G., Chen X., Liu Q. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | College of Material Science and Engineering, Chongqing University |
| Damage Evolution Equation of AZ31B Magnesium Alloy during Superplastic Deformation | Song M., Wang L., Liu R. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Chongqing University of Science and Technology |
| Deformation Behavior and Dynamic Recrystallization of As-cast Mg-Y-Nd-Gd-Zr Alloy: A Study With Processing Map | Zhao X., Zhang K., Li X.-G., Li Y.-J., He Q.-K., Sun J.-F. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | State Key Laboratory for Fabrication and Processing, Non-Ferrous Metals General Research Institute for Non-ferrous Metals |
| Effect and Analysis on Microstructure and Mechanical Properties of MB2 Magnesium Alloy Severely Deformed by Accumulative Roll Bonding (ARB). | Zhang B., Yuan Q. S. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | School of Material Science And Engineering, Xi'an University of Architecture & Technology |
| Effect of Deformation Twining on Annealing Behavior of AZ31 Mg Alloy | Liu T., Hu W., Liu Q. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Chongqing University |
| Effect of Microstructure on the Room Temperature Formability of Mg Alloys | Kang D.H., Kim S., Bae G.T., Kim K.-H., Bae J.H., Kim N.J. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Center for Advanced Aerospace Materials, POSTECH |
| Effect of Strain Ratio, Strain Rate and Initial Strain Direction on the Fatigue Behavior of AZ31 Wrought Magnesium Alloy | Begum S., Chen D., Xu S., Luo A. A. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Department of Mechanical and Industrial Engineering, Ryerson University |
| Examination of Dynamic Recrystallization during Compression of AZ31 Sheet | Xin R., Wang B., Chen X., Huang G., Liu Q. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | College of Material Science and Engineering, Chongqing University |
| Failure Initiation and Propagation in AZ31 Magnesium Alloys | Koike J., Ando D. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Dept of Materials Science, Tohoku University |
| Finite Element Simulation of Effect of Radial Compression Ratio on the Microstructure and Surface Roughness of Rotary Swaged Magnesium | Rong Li., Nie Z.R., Zuo T.Y. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | college of materials science and engineering, Beijing University Of Technology |
| Formability Evaluation of AZ31 Magnesium Alloy Tube at Elevated Temperature | He Z., Yuan S., Wu J. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Harbin Institute of Technology |
| Hot Deformation Behavior and Microstructure Evolution of Twin-roll-cast AZ31 Alloy: A Study with Processing Map | Peng W., Li P., Zeng P., Lei L. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Department of Mechanical Engineering, Tsinghua university |
| Investigation on Expansion Formability for AZ80 Magnesium Alloy | Zhang Z.-M., Wang Q., Zhang B.-H., Xue Y. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | College of Materials Science&Engineering, North University of China |
| Isothermal Deformation Behavior of MB15 in Micro-forming of Micro-gear | Wang C., Zhou J., Shan D., Guo B. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | School of Materials Science and Technology, Harbin Institute of Technology |
| Manufacturing Processes for Magnesium Alloys | Hort N., Kainer K. U. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | MagIC - Magnesium Innovation Centre, GKSS Research Centre, Geesthacht, German |
| Microstructure and Texture Evolution during Warm Compression of the Magnesium Alloy AZ31 | Jiang J., Godfrey A., Liu Q. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Laboratory of Advanced Materials, Dept of Materials Science and Engineering, Tsinghua University |
| Microstructure and Texture Evolution of AZ31 Magnesium Alloy during Rolling | Huang G., Liu Q., Xin R., Chen X., Wang L. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | College of Material Science and Engineering, Chongqing University |
| Microstructure Changes of as-cast Mg-Al-Ca Alloys with High Temperature Deformation | Xu S., Matumoto N., Ogawa K., Yamamoto K., Kamado S., Homa R., Kojima Y. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Department of Mechanical Engineering, Nagaoka University of Technology |
| Microstructures and Mechanical Properties of Rare Earth Magnesium Alloy Machined Chips Recycled by Severe Plastic Deformation | Peng T., Wang Q. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | School of materials Science and engineering, Shanghai Jiao Tong University |
| Optimal Process Exploration of Repeatedly Unidirectional Bending on Cold Rolled Magnesium Alloy Sheet | Huang G., Xu W., Huang G., Li H., Pan F. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | College of Materials Science and Technology, Chongqing University |
| Preparation of Semi-solid Billet of ZW61 Alloy by Equal Channel Angular Extrusion | Huang Z., Chen R., Han E. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Environmental Corrosion Center, Institute of Metal Research, Chinese Academy of Sciences |
| Research of Deformation Characteristics in Polycrystalline AZ31 Magnesium Alloy at Moderate Temperatures | Liu J., Chen D., Chen Z., Yan H., Jiang Z. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | School of Materials Science and Engineering, Hunan University |
| Research on Property of Mg-4Y-Mn and Mg-3Nd-Y-Mn Deformation Alloys | Fang D.-Q., Meng J., Jiang J.-H., Li R.-G. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Key Laboratory of Automobile Materials of Ministry of Education and Department of Materials Science and Engineering , Jilin University |
| Research on Super Plasticity of Mg-Li Alloys | Ji H. B., Yao G. C. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Northeastern University |
| Superplasticity of Hot-rolled Mg-5.8Zn-1Y-0.48Zr Magnesium Alloy Sheet | Yan H., Chen R., Han E. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Environmental Corrosion Center, Institute of Metal Research, Chinese Academy of Sciences |
| The Effect of Hot Deformation on Microstructure and Properties of MgZnYZr Wrought Alloy | Wei T., Rongshi C., Enhou H., Lu L., Yongbo X. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | Institute of Metal Research |
| The Hot Deformation Behavior and Structure Analysis of as-cast Mg-7Gd-5Y-1.2Nd-Zr Magnesium Alloy without Pre-homogenization Treatment | Ma M., Zhang K., Li X., Li Y., Xu Y., Zhao X., Zhang K., Zhang K., Mi X., Xiong B. | Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. | State Key Lab for Fabrication & Processing of Non-ferrous Metals, General Research Institute for Non-ferrous Metal |
| A New Approach for Inverse Parameter Calculations of the Plastic Deformation Behavior of AZ31 Magnesium Alloy | T. Ebeling, C. Hartig, and R. Bormann | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Hamburg University of Technology, Inst. of Materials Science and Technology, Hamburg, Germany |
| Application of Incremental Forming Technique to Mg-AZ31 Sheet | J. Park | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Hongik University, Seoul, Korea |
| Application of Neutron Diffraction in In-Situ Studies of Stress Evolution in High Temperature Creep Testing of Creep Resistant Magnesium Alloys | D. Sediako | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Canadian Neutron Beam Centre, Ontario, Canada |
| Blind Study of the Effect of Processing History on the Constitutive Behavior of Alloy AZ31B | C. Dreyer, F. Polesak, T. Shultz, and S. Agnew | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | University of Virginia, Charlottesville, Virginia |
| Deformation Mechanisms in AZ31 Magnesium Alloy Tube Bending | L. Jin, W. Wu, R. Mishra, A. Luo, A. Sachdev, and S. Yao | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Shanghai Jiao Tong University, Shanghai, China |
| Deformation Mechanisms in Magnesium Alloy Elektron 675 | D. Randman, W. Rainforth, B. Wynne, and B. Davis | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | IMMPETUS; Department of Engineering Materials; University of Sheffield, Sheffield, United Kingdom |
| Effect of Precipitates on Deformation Mechanisms at Low-Temperature in an AZ80 Magnesium Alloy | J. Jain, J. Zou, W. Poole, and C. Sinclair | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | The University of British Columbia, Vancouver B. C., Canada |
| Formability of Magnesium Sheet | D. Letzig, L. Fuskova, K. Hantzsche, G. Kurz, S. Yi, and J. Bohlen | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | GKSS Research Centre Geesthacht, Germany |
| Influence of Stress Ratio on Fatigue Crack Propagation Behavior of AZ31 Alloy | K. Song, H. Jung, and K. Shin | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Seoul National University, Seoul, Korea |
| Influences of Load Direction and Grain Size on Tension-Compression Yield Asymmetry of Extruded AZ31 Magnesium Alloy | D. Yin, and J. Wang | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Nanjing University of Science and Technology Nanjing, China |
| Microstructural Investigation of Twins under the Fracture Surface in AZ31 Mg Alloys | D. Ando, and J. Koike | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Tohoku University, Sendai, Japan |
| On the Microstructure and Texture Development of Magnesium Alloy ZEK100 During Rolling | J. Wendt, K. Kainer, G. Arruebarrena, K. Hantzsche, J. Bohlen, and D. Letzig | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Hamburg University of Technology, Inst. of Materials Science and Technology, Hamburg, Germany |
| Relation between the Microstructure and the Plastic Deformation Behavior in Mg12ZnY with the LPSO Structure | K. Hagihara, A. Kinoshita, Y. Sugino, N. Yokotani, M. Yamasaki, Y. Kawamura, and Y. Umakoshi | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Graduate School of Engineering, Osaka University, Osaka Japan |
| Test Results and FEA Predictions from Magnesium AM30 Extruded Beams in Bending and Axial Compression | D. Wagner, S. Logan, K. Wang, T. Skszek, and C. Salisbury | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Ford Motor Company; Dearborn, Michigan |
| Texture Evolution in an AZ31 Mg alloy during Direct and Indirect Extrusion Processes | S. Choi, H. Lee, D. Kim, D. Yoon, S. Park, and B. You | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | Sunchon National University, Sunchon, Korea |
| The Fracture Behavior of the B2 Intermetallic, MgY | R. Mulay, J. Wollmershauser, and S. Agnew | Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA | University of Virginia, Charlottesville, Virginia |
| Assessing and Modeling the Impact of Initial Microstructure on Dynamic Recrystallization of Sheets | F. Polesak, P. Krajewski, B. Raeisinia, and S. Agnew | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | University of Virginia, Charlottesville, Virginia |
| Atomistic Simulation of Grain Boundary Sliding in Mg during High Temperature Deformation | H. Zhang | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | Department of Chemical and Materials Engineering, University of Alberta, Alberta, Canada |
| Dynamic Blankholder Control for the Enhanced Forming Limit of Magnesium Sheets | W. Bang | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | RIST (Research Inst. of Industrial Sci. & Tech), Pohang, South Korea |
| Experimental and Computational Simulation of the Post-Warm Forming Constitutive Behavior of AZ31 | F. Polesak, B. Raeisinia, and S. Agnew | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | University of Virginia, Charlottesville, Virginia |
| Formability of Mg Alloys at Room Temperature | D. Kim, D. Kang, S. Kim, G. Bae, K. Kim, and N. Kim | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | McGill University, Montreal, Canada |
| Grain Size Effect on the Dome-Forming Limit and Deformation Mechanism of AZ31B Magnesium Alloy Sheets | H. Kim, W. Bang, and Y. Chang | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | POSTECH, Pohang, Korea |
| Implementation of the Anisotropy of Plastic Flow in Inverse Parameter Calculations of the Deformation Behavior of AZ31 Magnesium Alloy | T. Ebeling, C. Hartig, and R. Bormann | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | Hamburg University of Technology, Inst. of Materials Science and Technology, Hamburg, Germany |
| Importance of Crystallographic Texture of AZ31B on Flow Stress Anisotropy and Tension-Compression Asymmetry | M. Al-Maharbi, D. Floey, I. Karaman, I. Beyerlein, T. Hartwig, L. Kecskes, and S. Mathaudhu | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | Texas A&M University, College Station, Texas |
| Influence of Deformation Processing on the Tensile/Compressive Asymmetry in Wrought Mg-3Al-Zn Alloy | R. Liu, D. Yin, and J. Wang | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | Nanjing University of Science and Technology, Nanjing, China |
| Mechanical Behavior of AZ31 Due to Texture and Microstructure | D. Foley, M. Al-Maharbi, K. Hartwig, I. Karaman, L. Kecskes, and S. Mathaudhu | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | Texas A&M University, College Station, Texas |
| Plasticity in a Rod-Textured Extruded Mg AM30 Alloy | Q. Ma, and H. ElKadiri | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | Mississippi State University, Starkville, Mississippi |
| The Evolution of In-Grain Misorientation Axes (IGMA) During Deformation of Wrought Magnesium Alloy AZ31 | Y. Chun, and C. Davies | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | Monash University, Victoria, Australia |
| The Relationships between Grain Boundary Sliding and Grain Orientation in AZ31 Magnesium Alloys at Room Temperature | D. Ando, Y. Sutou, and J. Koike | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | Tohoku University, Sendai, Japan |
| Transmutation and Accommodation Effects by Glide Twinning | A. Oppedal, and H. ElKadiri | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | University, Mississippi State, Mississippi |
| Transmutation and Accommodation Effects by Glide Twinning | A. Oppedal, and H. ElKadiri | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | University, Mississippi State, Mississippi |
| Very High Strain Rate Deformation of AZ31b Mg Alloys Using Split Hopkinson Pressure Bar | M. Sanjari, A. Farzadfar, S. Yue, and E. Essadiqi | Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA | McGill University, Montreal, Canada |
| Texture formation and texture modelling of AZ31 magnesium wrought alloy | Styczinski A., Hartig C., Bormann R., Kaiser F., Letzig D., Bohlen J. | Kainer, KU editor (2003) Proceedings of the 6th International Conference on Magnesium Alloys and their Applications, Wolfsburg, Germany. | GKSS Research Centre Geesthacht, Germany |
| Acoustic emission study of the mechanical anisotropy of AZ31 magnesium alloy sheet | Dobron P., Chmelik F., Lukac P., Bohlen J., Letzig D., Kainer K.U. | Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. | GKSS Research Centre Geesthacht, Germany |
| Effects of Calcium on texture evolution and plastic anisotropy of the magnesium alloy AZ31 | Ebeling T., Hartig C., Bormann R., Bohlen J., Letzig D. | Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. | GKSS Research Centre Geesthacht, Germany |
| Experimental and Numerical Investigation of Texture Development During Hot Rolling of Magnesium Alloys | R. Kawalla, C. Schmidt, H. Riedel, A. Prakash | Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. | Freiberg University of Mining and Technology, Freiberg |
| Experimental and Numerical Investigation of Texture Development During Hot Rolling of Magnesium Alloys | R. Kawalla, C. Schmidt, H. Riedel, A. Prakash | Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. | Freiberg University of Mining and Technology, Freiberg |
| Fatigue crack propagation behavior of Mg-Al-Zn alloys | Han E. H., Ke W., Dietzel W., Kainer K.U., Zeng R.C. | Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. | GKSS Research Centre Geesthacht, Germany |
| Texture development in different routes ECAP processed Mg-Si alloys by neutron diffraction | Zheng M., Qiao X., Xu S., Hu X., Wu K., Gan W., Schreyer A., Kainer K.U., Brokmeier H.G., Schwebke B. | Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. | GKSS Research Centre Geesthacht, Germany |
| The influence of Calcium and Cerium mischmetal on the deformation behavior of Mg-3-Al-Zn | Laser T., Hartig C., Bormann R., Nürnberg M, Letzig D. | Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. | GKSS Research Centre Geesthacht, Germany |
| The Influence of Calcium and Cerium Mischmetal on the Deformation Behavior of Mg-3A1-1Zn | T. Laser, Ch. Hartig, R. Bormann, M.R. Nürnberg, D. Letzig | Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. | Hamburg University of Technology, Hamburg, Germany |
| A Novel Warm Tube Hydroforming Facility for Magnesium Tubes Processing | J.A. Esnaola, I. Torca, G. Arruebarrena, L. Galdos, C. Garcia | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Mechanical and Manufacturing Department, Mondragon Univertsitatea, Mondragon, Spain |
| Ab Initio Determined Materials-Design Limits in Ultra Light-Weight Mg-Li Alloys | W. Counts, M. Friák, D. Raabe, J. Neugebauer | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, Germany |
| Application of the Work hardening Model for Mechanical Anisotrophy Study of AZ31 Magnesium Alloy Sheet | K. Máthis, Z. Zdrailová, P. Dobron, F. Chmelík, J. Balík, J. Bohlen, D. Letzig | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Cepartmetn of Physics of Materials, Faculty of Mathematics and Physics, Charles University, Prague, Czech Republic |
| Crashworthiness Simulation of Mg Die Casting Parts Including Local Properties from Process Simulation | H. Gese, G. Oberhofer, A. Bach, U. Weiss, N. Nowack, P. Bernbeck | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | MATFEM Partnerschaft |
| Development of Microstructure and Texture of Magnesium Alloy ZEK 100 during Hot Rolling | J. Wendt, K. Hantzsche, J. Bohlen, K. U. Kainer, Sangbong Yi, D. Letzig | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | University of Technology, Hamburg, Germany |
| Effect of Blankhold Pressure on the Deep Drawing of Magnesium Sheets | W. Bang | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Research Institute of Industrial Science and Technology (RIST), Pohang, Sough Korea |
| Experimental and Numerical Investigation of the Activation of Pyramidal Slip during Deformation of Rolled Magnesium Alloy AZ31 | A. Prakash, C. Schmidt, H. Riedel, R. Kawalla | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Fraunhofer Institute for Mechanics of materials IWM, Freiburg, Germany |
| Fatigue Life and Cyclic Deformation Behavior of Microalloyed Wrought Magnesium Alloys in Corrosive Environments | C. Fleck, P.Maier | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Berlin Institute of Technology, Berlin, Germany |
| Forming Limit of Magnesium Alloy in Warm Forging Using CNC Servo Press with Controlled Forming Speed | R. Matsumoto, Y. Togase, K. Osakada | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Osaka University, Osaka, Japan |
| Influence of Alloy Composition and Heat Treatment on Damping Characteristics of Magnesium Alloys | G. L. Angrisani, C. Klose, D. Bormann, Fr.-W. Bach | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Leibniz University of Hanover, Hanover, Germany |
| Influence of Direct Aging on the Damping Behaviour of the Magnesium Alloy AZ81 | R. González-Martínez, D. Letzig, K.U. Kainer | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | GKSS Research Centre Geesthacht, Germany |
| Microstructure and Texture Effects on the Dyclic Plasticity of Extruded magnesium Alloy | L. Strutz, D. Letzig, K.U. Kainer | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | GKSS Research Centre Geesthacht, Germany |
| Recrystallisation Texture Weakening in Mg Alloyed with Misch Metal - Effect of Deformation Mode, Strain and Initial Grain Size | N. Stanford, Gang Sha, A. Beer, S. Ringer, M. R. Barnett | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Centre of Excellence for Design in Light Metals, Deakin University, Victoria, Australia |
| Study of Deformation and Annealing Textures in Symetrically and Asymmetrically cold Rolled AZ80 Magnesium Alloy | J. Jain, W.J. Poole, C.W. Sinclair, C. Necker | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Department of Materials Engineering, The University of British Columbia, Vancouver B.C., Canada |
| Textures at Deformation Region of an ECA Ped Mg by Synchrotron Diffraction | W.M. Gan, H.-G. Brokmeier, C. Randau, M.Y. Zheng, H. Chang, G.D. Fan, K. Wu | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | GKSS Research Centre Geesthacht, Germany |
| The role of Deformation Twinning during Fracture Behavior in AZ31 | D. Ando, J. Koike | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | Department of Materials Science, Tohoku University, Sendai, Japan |
| X-Ray NanoCT of Light Metal Samples: Visualizing of Internal 3D-Structures with Submicrometer Resolution | S. Becker, O. Brunke, M. Röder | Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. | GE Sensing & Inspection Technologies BmbH (phoenix/ x-ray), Wunstorf, Germany |
| Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loading | Yi S.B., Davies C.H.J., Brokmeier H.-G., Bolmaro R.E., Kainer K.U., Homeyer J. | Volume 54 | GKSS Research Centre Geesthacht, Germany |
| The effect of grain size on the deformation behavior of magnesium alloys investigated by the acoustic emission technique | Bohlen J., Dobron P., Meza-Garcia E., Chmelik F., Lukac P., Letzig D., Kainer K. U. | Volume 8 | GKSS Research Centre Geesthacht, Germany |
| High temperature deformation behaviour of a new magnesium alloy | Rao K.P., Prasad Y.V.R.K., Hort N., Huang Y., Kainer K.U. | Volumes 340-341, 345-346 | GKSS Research Centre Geesthacht, Germany |
| Analysis of Magnesium Alloy AZ31B-H24 for Ballistic Applications | Jones T., Burkins M., Gooch W. | Volume 291 | US Army Research Laboratory, MD |
| Anisotropy of the Damping Capacity of Rolled Mg-0.4Zn-0.6Zr (ZK01) Alloy | Peng L., Du L., Jin L., Wang O., Ding W. | Volume 291 | State Key Laboratory of Metal Matrix Composite, School of Materials Science and Engineering, Shanghai Jiao Tong University, China |
| Constitutive Behavior of Four Wrought Magnesium Alloys under Warm Forming Conditions | Agnew S., Dreyer C.E., Polesack III J.F., Chiu W.V., Neil C.J., Rodriguez M. | Volume 291 | Materials Science and Engineering, University of Virginia, VA; Ciencia de los Materiales, Universidad Politecnica de Madrid, Spain |
| Deformation Mechanisms of AZ31 Magnesium Alloy | Ebeling T., Hartig C., Laser T., Bormann R. | Volume 291 | Institute of Materials Science and Technology, Hamburg University of Technology, Germany; Institute for Materials Research, GKSS Research Centre Geesthacht, Germany; Magnesium Innovation Centre MagIC, GKSS Research Centre Geesthacht, Germany |
| Direct Chill Casting and Plastic Deformation of Magnesium Alloys | Harel G., El Mehtedi M., Spigarelli S., Bamberger M., Evangelista E., Sereni S., Rosen G. | Volume 291 | Department of Materials Engineering, Technion Israeli Institute of Technology, Israel; Dipartimento Di Meccanica Universita Politecnica Della March, University of Ancona, Italy; Centro Ricerche Fiat-Societa Consortile Per Azioni, Italy |
| Effect of {10-11} Contraction and {10-11}-{10-12} Double Twins on the Subsequent Deformation Behavior of Two Mg Alloys | Jiang L., Jonas J.J., Mishra R. | Volume 291 | Department of Materials Engineering, McGill University, Canada; General Motors Research & Development Center, MI |
| Effect of Coiling on Hot Bulge Testing of AZ31 Magnesium Sheet | Carter J. | Volume 291 | GM R&D Center, Materials & Processes Lab, MI |
| Elastic Constants of Magnesium Compounds from First-Principles Calculations | Ganeshan S., Zhang H., Shang S.L., Wang Y., Liu Z.-K. | Volume 291 | Department of Materials Science and Engineering, The Pennsylvania State University, PA |
| Flow Stress Modelling of Magnesium AZ31 Alloy Based on High Strain Plane Strain Compression Data | Bhattacharya R., Wynne B., Rainforth M., Davies B. | Volume 291 | Institute for Microstructural and Mechanical Processing Engineering, The University of Sheffield (IMMPETUS), UK; Magnesium Elektron, UK |
| Forming Characteristics of Mg Sheet with Variation of Temperature | Kwon Y.N., Lee Y.S., Lee J.H. | Volume 291 | Materials Processing Department, Korea Institute of Materials Science, Korea |
| Influence of Cerium on Texture and Ductility of Magnesium Alloy Extrusions | Mishra R.K., Gupta A.K., Rao R.R., Sachdev A.K., Kumar A.M., Luo A.A. | Volume 291 | Materials and Processes Laboratory, General Motors Research & Development Center, MI; National Physical Laboratory, India; International Advanced Research Centre for Powder Metallurgy and New Materials, India; India Science Laboratory, General Motors Research & Development Center, India |
| Investigating the Effect of Strain Rate and Temperature on the Deformability and Microstructure Evolution of AZ31 Magnesium Alloy | Maksoud I.A., Ahmed H., Rödel J. | Volume 291 | German University in Cairo, Egypt; Netherlands Institute for Metals Research (NIMR), Netherlands |
| Microstructure and Bendability of AM60 and AZ61 Magnesium Alloy Tubes | Wang Y., Jin L., Zeng X.,Ding W., Luo A.A., Sachdev A.K., Mishra R. | Volume 291 | National Engineering Research Center of Light Alloys Net Forming, State Key Laboratory of Metal Matrix Composite, School of Materials Science and Engineering, Shanghai Jiao Tong University, China; Materials and Processes Laboratory, General Motors Research & Development Center, MI |
| Some Issues Relating to the Ductility of Wrought Magnesium Alloys | Barnett M., Arhatari B., Stanford N., Beer A., Keshavarz Z., Ma X. | Volume 291 | Centre for Material and Fibre Innovation, GTP, Deakin University, Australia; Department of Physics, LaTrobe University, Australia |
| Study of Deformation Modes in AZ80 Magnesium Alloy | Jain J., Poole W.J., Sinclair C.W. | Volume 291 | Department of Materials Engineering, The University of British Columbia, Canada |
| Texture Randomization of Magnesium Alloys Containing Rare Earth Elements | Senn J., Agnew S. | Volume 291 | Materials Science and Engineering, University of Virginia, VA |
| The Flow Stress during Hot Compression Deformation of a Mg-Gd-Y-Zr Magnesium Alloy: Experiments and Numerical Simulations | Zhang X., Wang J.T. | Volume 291 | Department of Materials Science and Engineering, Nanjing University of Science and Technology, China |
| Deformation mechanisms in an AZ31 cast magnesium alloy as investigated by acoustic emission technique | Meza Garcia E., Dobron P., Bohlen J., Letzig D., Chmelik F. ,Lukac P., Kainer K. U. | Volumes 444, 454-455, 460-461, 462 | GKSS Research Centre Geesthacht, Germany |
| Plastic anisotropy and texture evolution of rolled AZ31 magnesium alloys | Hartig C., Styczynski A., Kaiser F., Letzig D. | Volume 482, 488-489, 495-497 | GKSS Research Centre Geesthacht, Germany |
| Neutron diffraction study on the texture development during extrusion of Mg-AZ31 | Yi S.B., Brockmeier H.-G., Kainer K.U., Letzig D., Bohlen J. | Volume 350 | GKSS Research Centre Geesthacht, Germany |
| In situ measurements of texture variation during a tensile loading of Mg-alloy AM20 using synchrotron x-ray radiation | Yi S.B., Brockmeier H.-G., Bolmaro R.E., Kainer K.U., Lippmann T. | Volume 50, 51 | GKSS Research Centre Geesthacht, Germany |
